張 升教授-北京科技大學

張　升
教授
機械裝備與控制工程系
zhangsheng@ustb.edu.cn
010-62334106
機電樓810


學 位：博士
所在系所：機械裝備與控制工程系
行政職務：
辦公地點：機電樓810
辦公電話：010-62334106
電子郵箱：zhangsheng@ustb.edu.cn
科研方向：金屬增材制造（3D打�。┎牧�/工藝/裝備/應用
本科生課程：增材制造技術原理及應用

社會/學術兼職：中國機械工程學會增材制造分會委員；中國材料研究學會增材制造專委會委員，《增材制造前沿（英文）》青年編委

教育經歷：

2005.09－2009.06　中北大學材料科學與工程學院，獲學士學位 2009.09－2014.06　華中科技大學材料科學與工程學院，獲博士學位

工作經歷：

2014.08—2017.08　 中國航空制造技術研究院，工程師

2017.09—2018.11　 中國航空制造技術研究院，高級工程師

2018.12—2023.06  北京科技大學，機械工程學院，副教授

2023.07- 至  今  北京科技大學，機械工程學院，教授


代表性論著
1. Zhang, Yuqi, Zhang, Sheng, Zou, Zhiyi, Shi, Yusheng. Achieving an ideal combination of strength and plasticity in additive manufactured Ti–6.5Al–2Zr–1Mo–1V alloy through the development of tri-modal microstructure. Materials Science and Engineering: A, 2022,840:142994

2.Zhang Sheng, Zhang Yuqi, Zou Zhiyi, Shi, Yusheng, Zang, Yong. The microstructure and tensile properties of additively manufactured Ti–6Al–2Zr–1Mo–1V with a trimodal microstructure obtained by multiple annealing heat treatment. Materials Science and Engineering: A, 2022,831:142241

3.Zhang Sheng, Ding Minglu, Wang Lu, Ge Wenjun, Yan Wentao. Laser powder bed fusion of diamond/N6 MMCs enabled by Ni-Ti coated diamond particles. Materials & Design, 2022,217: 110635

4.Zhang Luo, Li Yetao, Zhang Qingdong, Zhang Sheng. Microstructure evolution, phase transformation and mechanical properties of IN738 superalloy fabricated by selective laser melting under different heat treatments. Materials Science and Engineering: A,2022,844:142947

5.Yue Tian-yang, Zhang Sheng, Wang Chao-yue, Xu Wei, Xu Yi-di, Shi Yu-sheng, Zang Yong. Effects of selective laser melting parameters on surface quality and densification behaviours of pure nickel. Transactions of Nonferrous Metals Society of China, 2022,32(8): 2634

6.Zhang Luo, Li Yetao, Zhang Sheng, Zhang Qingdong. Selective laser melting of IN738 superalloy with a low Mn+Si content: Effect of energy input on characteristics of molten pool, metallurgical defects, microstructures and mechanical properties. Materials Science and Engineering:A, 2021,826:141985

7.Sheng Zhang，Xian Cheng, Yao Yao, Yehui Wei, Changjun Han, Yusheng Shi, Qingsong Wei, Yusheng Shi. Porous niobium coating fabricated with selective laser melting on titanium substrates: Preparation, characterization and cell behavior. Materials Science and Engineering C,2015,53:50-59

8.Sheng Zhang, Dewen Yushu, Boxun Liu, Bo Sun, Chunze Yan, Liao Hao, Yusheng Shi. Effect of firing temperature on metal-ceramic bond strength of porcelain fused to metal restorations Co-Cr alloy fabricated by selective laser melting. Lasers in Engineering. 2015, 31 (3-4) :195-209

9.Zhang Sheng，Li Yong，Hao Liang，Xu Tian，Wei Qingsong，Shi Yusheng. Metal-Ceramic Bond Mechanism of the Co-Cr Alloy Denture with Original Rough Surface Produced by Selective Laser Melting. Chinese journal of mechanical engineering，2014，27(1)：69-78

10.Sheng Zhang，Qing Song Wei，Linyu Cheng，Suo Li，Yusheng Shi. Effects of scan line spacing on pore characteristics and mechanical properties of porous Ti6Al4V implants fabricated by selective laser melting. Materials and Design. 2014, 63 (21) :185-193

11.Sheng Zhang, Qing Song Wei, Guang Ke Lin, Xiao Zhao, Yusheng Shi. Effects of Powder Characteristics on Selective Laser Melting of 316L Stainless Steel Powder. Advanced Materials Research，2011，189(193): 3664-67

12.張升，桂睿智，魏青松，史玉升. 激光選區熔化成形TI6AL4V鈦合金開裂行為及其機理研究.機械工程學報，2013，49(23)：21-27

13.Linyu Cheng, Sheng Zhang, Qingsong Wei, Yusheng Shi. Microstructure and mechanical properties of stainless steel and nano hydroxyapatite composites fabricated by selective laser melting. 金屬學報，2014，24(6):1510-1517

14.WenShifeng, Shuai Li, Qingsong Wei, Chunze Yan, Sheng Zhang, Yusheng Shi. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts. Materials Processing Technology, 2014, 214(11):2660–2667

成果與榮譽

主要從事增材制造（3D打�。┭芯浚�近年來主持了國家重點研發計劃、國防重點型號技改項目、國防領域基金、裝發快速支持基金、北京市人才基金等國家縱向課題10多項，承擔航天五院、航天一院、陸軍研究院等國防橫向科研課題30多項，課題總經費超過2000多萬。圍繞激光與材料的作用機制，從成形工藝、后處理工藝及裝備技術方面提出了一系列的調控措施，實現了對激光3D打印制件的精確控形控性，研發出具有自主知識產權的系列裝備。相關裝備和產品已在10多個單位獲得成功應用。在國內外權威期刊上發表SCI論文30多篇，授權發明專利20項，參編專著（教材）1部，受邀國內外學術會議報告20余次，獲省部級發明獎2項，多次榮獲北京科技大學學生創業優秀指導教師、北京科技大學優秀干部等榮譽稱號。


主頁：https://me.ustb.edu.cn/shiziduiw ... 2022-03-24/448.html