生物3D打印英文專著：Cell Assembly with 3D Bioprinting

來源：EngineeringForLife

南極熊獲悉，EFL團隊與內華達大學雷諾分校的金翼飛教授團隊合作，總結了兩個團隊近些年圍繞生物3D打印的系列工藝、墨水及應用等的相關研究進展。該專著已于近日在Wiley出版。

本書總結了系列的生物3D打印方法，特別對投影式光固化生物3D打印、擠出式生物3D打印中的同軸打印、自支撐打印、微凝膠打印等方法進行了重點闡述，此外對生物3D打印典型Protocol、生物墨水設計、體外模型構建等也進行了詳細闡述。由于寫作倉促，生物3D打印的發展也非常快速，書中難免會有諸多遺漏及錯誤之處，還望讀者多批評指正。

本書共分為14章：

1.3D Bioprinting, A Powerful Tool for 3D Cells Assembling;
2.Representative 3D Bioprinting Approaches;
3.Bioink Design: From Shape to Function;
4.Coaxial 3D Bioprinting;
5.Digital Light Projection-Based 3D Bioprinting;
6.Direct Ink Writing for 3D Bioprinting Applications;
7.Liquid Support Bath–Assisted 3D Bioprinting;
8.Bioprinting Approaches of Hydrogel Microgel;
9.Biomedical Applications of Microgels;
10.Microfiber-Based Organoids Bioprinting for In Vitro Model;
11.Large Scale Tissues Bioprinting;
12.3D Printing of Vascular Chips;
13.3D Printing of In Vitro Models;
14.Protocol of Typical 3D Bioprinting.

詳細介紹：
題目：Cell Assembly with 3D bioprinting, Wiley, ISBN: 978-3-527-34796-4
DOI： https://doi.org/10.1002/9783527828593