Raise 3D（上海復志，原派恩），50臺眾籌超早鳥準備出貨

做一下介紹，本人是剛剛入門3D打印的工業設計專業的菜鳥，想?yún)⑴c3D打印的洪流當中。所以看中了Raies 3D，成為了他們的50超早鳥，也是全球最快收到機子的人（ps：第一批的人員當中，國內就我一個人，根據官方回復），國內基本3天就能到了。
-------------------------------------------華麗的分割線-----------------------------------------

以下是我們收到的郵件，所有出廠的機子，進行了5000小時以上的打印。

文中還提到了美國，歐洲兩個人數較多的地區的發貨時間。如果有興趣可以到官網去購買，但是2016年2月份才會發貨。

打包看起來也是不錯，活動部位都已經用膠帶去封號，防止滑動。

機子的軟件暫時沒有更新到，如果有軟件的測評會第一時間與大家分享。。。

期待元旦左右收到機子。到時給大家分享開箱和機子測評。


祝大家元旦快樂�。�

Dear Raisers, Great new! We have finished assembling the 50 super early bird N2 printers and tested all of them. It is not easy but we did it. Check out all the machines that are ready and waiting for packing. Our technicians are making the final checks right now. You may notice from the picture that outside is already dark and yes, the picture was taken at 10 PM. We worked extra shift everyday just to make sure that every machine sent to you is in good quality.   We have spent more than 5,000 hours in total on testing those machines. Each machine went through a series of tests including prints from small to large size, dual extruder prints and prints with different materials like PLA and ABS. Here are pictures of the models being printed during the QC process and this is only a tip of the iceberg. (PS: Chinese people love Buddha!) We need a bigger table I guess. Good quality prints and high consistency. 400mm tall Buddhism Goddess from N2 plus. Yummy cupcakes for your holiday The next thing is to pack these machines up and send out to each of you Raisers. Let's take a quick view on how we pack these machines. Before anything, we clean the machine completely and put on all the warning labels. Then, we use 12 clips and other restriction parts to hold all moving parts still so they won't be damaged during shipping. Please remember to take all the clips and restriction parts out before operating the printer. Then we pack all the free tools, power cable, one spool of filament, one USB drive, extra nozzle (for KS stretching reward) and camera (if applicable). A lot of foam is used to protect all of those and the printer. At last we pack the printer and the accessories into a large thick carton box and then it is ready for shipping out. Packing process Free tools, power cable, spool of filament, redundant parts and etc. Ta-da! Your printer is ready to go! Generally, for all Raisers in Europe, your printers will be sent out on 12.26 (UT+8:00) by sea. For all Raisers in the US, your printers will be sent out on 12.30 (UT+8:00) by sea. For the rest, we will ship your printers out as required way. Please wait for your printer to arrive. (This is only scheduled for the 50 super early bird N2 printers.) Thank you all for the support and happy holiday! Wish you all happy and lucky!

每臺機測試5000個小時？？？？別坑我，5000個小時是208天…………如果按50mm/s速度，1.75的耗材就要用掉90，000米，大約200公斤的料，按便宜的國產50元/公斤算，都要一萬塊，求可能性

期待你收到機器以后給做出評測�。�樓主

北極熊 發表于 2015-12-28 17:19
期待你收到機器以后給做出評測��！樓主

一定的，大家分享，成為一個聚集地，才會有更多人過來分享

jonsonliang 發表于 2015-12-28 22:10
一定的，大家分享，成為一個聚集地，才會有更多人過來分享

是啊，已經把你的投稿推薦到首頁了。這款設備取得了不錯的眾籌成績，相信真機的使用也會帶來驚喜。你這篇文章昨天我發給Raise 3D的總經理看了，O(∩_∩)O~

不错不错看着心动

看著打印質量不錯~

阿森納球童 發表于 2015-12-29 14:00
看著打印質量不錯~

暫時還在測試中。。。還沒有完善。。單噴頭基本沒有問題�？墒请p噴頭還存在問題

yjlrb 發表于 2016-1-6 02:18
每臺機測試5000個小時？？？？別坑我，5000個小時是208天…………如果按50mm/s速度，1.75的耗材就要用掉90 ...

這句話是廠家提供。。說已經花了5000測試機子。。。估計就是最原始的那臺。。。我們新生產肯定沒有。這機子從設計到研發生產應該有兩年。。他們公司有第一代產品

jonsonliang 發表于 2016-1-7 08:16
暫時還在測試中。。。還沒有完善。。單噴頭基本沒有問題�？墒请p噴頭還存在問題

双喷头作为可选附件是最好的方式。实际用的过程中双喷头很少用到。而且稳定性一般。