Drum Stick Prosthetic假肢模型分享

該假肢模型名稱為Drum Stick Prosthetic（該模型僅用于公益，不可用于商業用途）

是KaelumHasler在2017年6月25日上傳至Thingiverse網站的目前項目還在更新中。原文地址為（有可能被墻）：https://www.thingiverse.com/thing:2404149
數據文件下載鏈接：https://pan.baidu.com/s/1QC85gK1TOyFdgcm_zZrcsA     提取碼：7a17
以下為谷歌機翻，不喜勿噴~原文后附

摘要
你好！幾個星期前，一位當?shù)氐母改竵碚椅遥瑔栁沂欠窨梢詾樗�的兒子做一個鼓棒假肢，他的兒子手上沒有手指，幾乎沒有拇指。我說我很樂意提供幫助，所以在這里！包含Autodesk Inventor文件，以便您可以根據需要修改文件。
打印設置
打印機：
習慣
筏子：不重要
支持：無
分辨率：.1
填充：40％
筆記：
分別打印每個部件，以確保合適。建議使用ABS，nGen或XT打印。如果需要進行任何修改，則包含Inventor文件。快樂印刷！
印后
部件
確保打磨/移除所有鋒利的邊緣，鉆出任何孔，然后將蛤殼孔打到M3。在粘貼魔術貼之前清潔表面并泡沫好運！
需要的材料
你會需要：
自粘魔術貼
6毫米醫用泡沫
1/4 - 20螺紋桿（至少4個長）
2 X 1/4 - 20個堅果
3個M5螺母和25毫米長M5螺栓
1個鼓棒
10 x m3 x 20mm螺栓（不銹鋼）
打�。�
1 x袖口
2 x m5拇指旋鈕
1 x 1/4 - 20旋鈕
3 x春天
1個手殼
1 x Palm Shell
1 x關節
1個DrumStick支架


原文：
Summary
Hello! A few weeks ago, a local parent came to me and asked if I could make a drumstick prosthetic for her son, whom had a hand with no fingers and almost no thumb. I said I would be happy to help, and so here it is! The Autodesk Inventor files are included so that you may modify the files to your needs.
Print Settings
Printer:
Custom
Rafts:Doesn't Matter
Supports:No
Resolution:.1
Infill:40%
Notes:
Print each piece separately, to make sure the fit is correct. It is recommended to print out of either ABS, nGen, or XT. The Inventor Files are included if any modifications need to be made. Happy Printing!
Post-Printing
Assembly
Make sure to sand/remove all sharp edges, bore out any holes, and tap the clam shell holes to M3. clean the surfaces before adhering Velcro and foam good luck!
Materials Needed
You will need:
Self Adhering Velcro
6mm medical foam
1/4 - 20 Threaded rod (At least 4 in long)
2 X 1/4 - 20 nuts
3 X M5 nuts and 25mm long M5 bolts
1 x drum stick
10 x m3 x 20mm bolts (Stainless Steel)
Print:
1 x cuff
2 x m5 thumb knobs
1 x 1/4 - 20 knob
3 x Spring
1 x Hand Shell
1 x Palm Shell
1 x Joint
1 x DrumStick holder